Electraking Fzc

04/02/2014

http://eshots.iirme.com/eshot/exhi/mee/2014/bh/7G01.html

04/02/2014

25/11/2013

https://www.surveymonkey.com/s/TMDLLL5

07/09/2013

Steel is an alloy of iron with about 1 percent carbon. It may also contain other elements, such as manganese. Whereas pure iron is a relatively soft metal that rusts easily, steel can be hard, tough, and corrosion-resistant. Used to make almost everything from skyscraper girders, automobiles, and appliances to thumb tacks and paper clips, steel is one of the world's most vital materials. Among all the metals, iron is second only to aluminum in natural abundance, making up 4.7 percent of the earth's crust, and occurring mainly as its various oxides. The main product made from iron is steel, the least expensive and most widely used of all metals.

18/08/2013

While aluminum is the most common metal found in the Earth's crust, the most common metal found on Earth is iron, mostly because it makes up such a large part of the Earth's core.

17/08/2013

Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals. The chief ore of aluminium is bauxite.
Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. Aluminium is a relatively soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness. It is nonmagnetic and does not easily ignite. A fresh film of aluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (as much as 98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa. Aluminium has about one-third the density and stiffness of steel. It is easily machined, cast, drawn and extruded.

31/07/2013

In metallurgy, stainless steel, also known as inox steel or corrosion-resistant steel or CRES when the alloy type and grade are not detailed, particularly in the aviation industry. Stainless steel does not readily corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments.
Similarly to steel, stainless steel is not a very good conductor of electricity, with about a few percent of the electrical conductivity of copper.
Ferritic and Martensitic stainless steels are magnetic.
Austenitic stainless steels are non-magnetic.
Stainless steel’s resistance to corrosion and staining, low maintenance and familiar lustre make it an ideal material for many applications. There are over 150 grades of stainless steel, of which fifteen are most commonly used. The alloy is milled into coils, sheets, plates, bars, wire, and tubing to be used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries) and as an automotive and aerospace structural alloy and construction material in large buildings.

09/05/2013

PVC was accidentally discovered at least twice in the 19th century, first in 1835 by French chemist Henri Victor Regnault and then in 1872 by German chemist Eugen Baumann. PVC is a thermoplastic polymer,with good insulation properties but because of its higher polar nature the electrical insulating property is inferior to non polar polymers such as polyethylene and polypropylene.
As the dielectric constant, dielectric loss tangent value and volume resistivity are high, the corona resistance is not very good, it is generally suitable for medium or low voltage and low frequency insulation materials.
PVC's relatively low cost, biological and chemical resistance and workability have resulted in it being used for a wide variety of applications. It is used for sewerage pipes and other pipe applications where cost or vulnerability to corrosion limit the use of metal. With the addition of impact modifiers and stabilizers, it has become a popular material for window and door frames. By adding plasticizers, it can become flexible enough to be used in cabling applications as a wire insulator. It has been used in many other applications.

29/04/2013

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as household appliances, aluminium extrusions, and automobile and bicycle parts.