Dan Miller's Garage

Call Directions Contact the business

Dan Miller's Garage ASE Certified Master Tech. Sharing shop tips, fixes, and advice to keep your trucks on the road. As an Amazon Associate I earn from qualifying purchases.

best sight in the world: fresh Australian iron sitting in the garage ready for a weekend swap! 🇦🇺🛠️if you're looking to ...
07/17/2026

best sight in the world: fresh Australian iron sitting in the garage ready for a weekend swap! 🇦🇺🛠️

if you're looking to eliminate that terrible factory nose-dive and get a clean, level 2.5" to 3" lift on your Toyota without making it ride like a stiff lumber wagon, matched Dobinsons coils and struts are literally the gold standard.

forget waiting on 3-month factory backorders from overseas—I dropped the direct amazon link in the comments below where you can snag this exact boxed setup sitting in local stock ready to ship! 👇📦

say goodbye to bottoming out on the trails boys, let's get wrenching! 🍻🦅

friendly reminder from your local grease monkey: please for the love of god stop putting cheap $50 aluminum leveling spa...
06/29/2026

friendly reminder from your local grease monkey: please for the love of god stop putting cheap $50 aluminum leveling spacers on your $60k trucks. ur suspension geometry hates you, it rides like a busted shopping cart, and u are destroying ur ball joints. just pulled another set of cheap pucks off a customer's truck today and finally slapped on a proper set of Eibach 2.0 coilovers. do it right the first time so u dont end up paying a shop like mine twice to fix ur mistakes. if u actually care about ur ride quality, i'll drop the exact kit we recommend in the comments.

rant over. back to wrenching. 🛠️🍺

Happy Sunday morning fellas! ☕️🛻Had a buddy swing by the garage yesterday and he just put the BAKFlip MX4 on his 3rd Gen...
06/07/2026

Happy Sunday morning fellas! ☕️🛻

Had a buddy swing by the garage yesterday and he just put the BAKFlip MX4 on his 3rd Gen TRD Off-Road (pics below). Got to see it in person and man, it looks unbelievably clean. It sits so perfectly flush with the bed rails.

I’ve been debating for weeks on what cover to get for my own rig, and seeing his setup might have finally sold me on the hard-folding style.

For those of u running the MX4 long-term, how is it holding up to the weather? Is it really as watertight as everyone says?I’m looking at ordering this exact kit today while I've got some weekend downtime: [ [https://linktw.in/UNezkG](https://linktw.in/UNezkG) ]

Let me know your honest thoughts before I pull the trigger! Have a great Sunday everyone!

Weekend PSA for the GM guys out there.I'm seeing way too many guys throwing a 2.5" or 3" leveling spacer on their 2007-2...
06/06/2026

Weekend PSA for the GM guys out there.

I'm seeing way too many guys throwing a 2.5" or 3" leveling spacer on their 2007-2018 Silverado or Sierra and then complaining that the truck rides like a wooden wagon or wanders all over the highway.

Listen, the factory stamped steel upper control arms were NOT designed for that geometry. When u lift the front end that high, your factory ball joints are completely maxed out. They bind up, they wear out in months, and worst-case scenario... u snap a ball joint doing 70mph down the interstate. 💀
If u are leveled or lifted, u absolutely NEED an aftermarket Forged Upper Control Arm to correct the ball joint angle and give u your suspension travel back. Don't risk your life and your rig over a piece of cheap factory steel.

I dropped the link in the comments for the exact heavy-duty Forged Aluminum set that fixes this instantly without breaking the bank. Build it right the first time fellas! 🛻💨🔧

sunday shop talk. if your steering wheel shakes violently every time u hit the brakes on the highway, your factory rotor...
05/31/2026

sunday shop talk. if your steering wheel shakes violently every time u hit the brakes on the highway, your factory rotors are warped. running big heavy tires or towing a load will cook factory blank rotors like the ones on this rig super fast.

if u are spending the weekend doing a brake job, absolutely do not put cheap blank auto parts store rotors back on it. u need slotted and drilled rotors to dissipate that extreme heat. upgrading your brakes is the best insurance policy for your truck. what projects did u guys knock out in the garage this weekend? 🔧

seen way too many half ton trucks squatting all the way to the bump stops on the highway today dragging heavy boats and ...
05/31/2026

seen way too many half ton trucks squatting all the way to the bump stops on the highway today dragging heavy boats and campers to the lake. guys, if u tow heavy on the weekends, do your leaf springs and your steering geometry a massive favor. factory suspension is too soft for that tongue weight. u need to install helper air bags in the rear to level it back out. makes towing 100x safer n smoother. dont be that guy pointing his headlights at the sky lol 🍻

out with the old blown factory trash, in with the new. side by side u can really see how wimpy the stock stuff is. getti...
05/26/2026

out with the old blown factory trash, in with the new. side by side u can really see how wimpy the stock stuff is. getting ready to throw these in n get this truck back on the dirt. always feels good doing a suspension refresh. boots are already dirty n its not even 9am yet ☕🔧

Address

4550 Industrial Boulevard
Dallas, TX
75207

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 1pm

Telephone

+6281548751199

Website

Alerts

Be the first to know and let us send you an email when Dan Miller's Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dan Miller's Garage:

Shortcuts

Share